IMPORTANT SAFETY INSTRUCTIONS
Read before using the tools in this catalogue! Projectile and Fragmentation Hazards: Modern metalcutting operations involve high spindle and cutter speeds and high temperatures and cutting forces. Hot metal chips may fly off the workpiece during metalcutting. Although cutting tools are designed and manufactured to withstand high cutting forces and temperatures, they can sometimes fragment, particularly if they are subjected to over-stress, severe impact, or other abuse. To avoid injury: Always wear appropriate personal protective equipment, including safety goggles, when operating metalcutting machines or working nearby. Always make sure all machine guards are in place. Breathing and Skin Contact Hazards: Grinding carbide or other advanced cutting tool materials produces dust or mist containing metallic particles. Breathing this dust or mist - especially over an extended period - can cause temporary or permanent lung disease or make existing medical conditions worse. Contact with this dust or mist can irritate eyes, skin, and mucous membranes and may make existing skin conditions worse. To avoid injury: Always wear breathing protection and safety goggles when grinding. Provide ventilation control and collect and properly dispose of dust, mist, or sludge from grinding. Avoid skin contact with dust or mist. For more information, read the applicable Material Safety Data Sheet provided by Kennametal and consult General Industry Safety and Health Regulations, Part 1910, Title 29 of the Code of Federal Regulations. These safety instructions are general guidelines. Many variables affect machining operations. It is impossible to cover every specific situation. The technical information included in this catalog and recommendations on machining practices may not apply to your particular operation. For more information, consult Kennametal's Metalcutting Safety booklet, available free from Kennametal at 724 539 5747 or fax 724 539 5439. For specific product safety and environmental questions, contact our Corporate Environmental Health and Safety Office at 724 539 5066 or fax 724 539 5372.
Kennametal, the stylised K, A4, Beyond, Beyond Drive, DFC, DFR, DFSP, DFT, Drill Fix, Dodeka, Dodeka MAX, ERICKSON, Experience Powering Productivity, GOdrill, GOmill, GOturn, HARVI I, HARVI II, HARVI III, KCP15, KCPM15, KCPM45, KCSM15, KCU10, KCU25, KCU40, KC643M, KC7140, KC7410, KC7225, KC7315, KC7320, KC7325, Kennametal Konnect, Kenna Universal, KenTIP, KM, KSEM, KSEM PLUS, MaxiMet, Mill 1, Mill 4, Mill 1-7, Mill 1-10, Mill 1-14, Mill 1-18, Mill 1-25, Mill 4-15, NOVO, Stellram, and Whistle Notch are trademarks of Kennametal, Inc. and are used as such herein. The absence of a product, service name, or logo from this list does not constitute a waiver of Kennametal's trademark or other intellectual property rights concerning that name or logo. iPad is a registered trademark of Apple Inc., registered in the U.S. and other countries. iTunes is a registered trademark of Apple Inc., registered in the U.S. and other countries. SAFE-LOCK is a trademark of Haimer GmbH and SAFE- OCK is a registered trademark of Haimer GmbH. Weldon is a registered trademark of Weldon Tool Company. Copyright 2015 by Kennametal Inc., Latrobe, PA 15650. All rights reserved.Previous Page